e4e Online Store | RUGS & MATS | Entrance Mats
Ref: RL1001Waterhog Classic and Diamond mats stop dirt and water being tracked in from outside preventing damage and soiling of expensive floor coverings. Their tough bi-level construction works in an ingenious way. The upper level of the mat wipes and scrapes footwear. Dirt and moisture fall to the lower level where it cannot be tracked off.The stain resistant pile will not crush and is guaranteed against rotting or fading for five years. The exclusive water dam design allows the mat to hold up to 6.5 litres of water per square metre. The special cleated nitrile rubber backing resists carpet creep and, if placed outside, will not crack up or curl even in the most punishing weather conditions.Key features of the Waterhog Classic:1- Upper surface of mat scrapes and wipes footwear2- Dirt and water fall into the lower level where it cannot be tracked off3- Crushproof rubber reinforced nubs4- Anti-static stain resistant fabric won't fade or rot5- Cleated rubber backing helps prevent carpet creep6- Unique water dam retains up to 6.5 litres of water per square metre preventing run-off onto surrounding floorPlease allow approx 10-15 days for delivery More...
Ref: RL1002Waterhog Diamond mats are even tougher than our Waterhog Classic range. Constructed in the same way, they have a bi-level design to trap dirt and water, but instead have a unique diamond design and a 50% heavier pile. Waterhog Diamond gives you even more scraping, wiping and trapping action for the most punishing conditions.Key features of the Waterhog Diamond:1- Ridged construction effectively removes and traps dirt and moisture below shoe level, preventing it from being tracked further into the building. No other mat in the industry does this as effectively as a Waterhog2- Exclusive rubber-reinforced face nubs prevent pile from crushing to maintain high performance and extend product life. This means you won't have the unsightly 'worn path' appearance through the centre of the mat3- Premium tri-denier polypropylene fibre system allows the fabric to dry quickly while preventing fading and rotting. 50% heavier than Waterhog Classic4- Anti-static rating averaging 1.2KV with a maximum average voltage of 1.6KV as measured by the AATCC. This means that Waterhog mats are safe for use in computer rooms and around electronic equipment5- Gripper backing keeps mats in place6- Water dam retains up to 6.5 litres of water per square metre, preventing the water from flowing off the mat and minimising damage to your surrounding floors and carpets7- Certified Slip Resistant by the National Floor Safety InstituteSpecificationsFace: Moulded reinforced textile.Yarn: Solution dyed polypropylene.Mat Height: 10 mm.Face weight: Heavy 36 oz/sq.ydBacking: SBR RubberSize variation: +/- 2%When purchasing a mat ensure that you have sufficient clearance underneath any door that needs to pass over the top.Please allow approx 10-15 days for delivery More...
Ref: RL1004Nitrile rubber encapsulated cushion, provides exceptional antifatigue performance, comfort and durability. They alleviate stress to the back and legs where people have to continually stand or walk.Most industrial anti-fatigue mats have exposed foam which soaks up water, greases and oils, and should only be used in dry areas. Happy Feet mats feature a dense rubber cushion, encapsulated within solid nitrile rubber to protect against deterioration and contamination.Key Benefits:1- Can be used in dry to damp areas where traction is not critical (Mats with a Gripper surface can be ordered in specially if required)2- Exceptional anti fatigue performance with unique safety and dirt stopping features3- Highly resistant to chemicals, animal fats and petroleum products4- High heeled shoes will not damage the hard wearing surface5- Static dissipative so are safe to use in computer rooms and electrical part manufacturers6- Extremely versatile and may be used in production lines or any industrial and commercial environments7- Low profile, high visabilty borders for added safety8- Rubber borders will not curl or crack9- Safe for welding use10- Certified Slip Resistant by the National Floor Safety InstituteSpecification:Face: Solid Nitrile Rubber.Core: 9mm Rubber cushion.Mat Height: 10mm.Size variation: +/- 2%Please allow approx 10-15 days for delivery More...
Ref: RL1003Launderable natural cotton mat with a nitrile rubber backing. Cotton mats reduce the amount of dust entering premises and trap moisture. The carpet face is a heavy duty plush 1050 gsm which makes Crystal Cotton mats the most effective dust control mats on the market and very effective at absorbing moisture. Choose from 4 colours and a wide range of sizes.Good For: Light soil applications Dust controlWater absorptionNot Ideal For: Heavy industrial applicationsVery damp environments (Cotton will take a long time to dry)Exposure to direct sunlight or bleachIdeal Placement: Indoor entrywaysLight traffic areasNot recommended for use in areas exposed to grease or petroleum products. When purchasing a mat ensure that you have sufficient clearance underneath any door that needs to pass over the top.Please allow approx 10-15 days for delivery More...
Ref: RL1005Highly abrasive mats aggressively scrape and wipe footwear to remove heavy soil, grit and sand etc. Brush fibre intertwined with carpet fibre acts as a brush on the soles of shoes as people walk over the mat. In independent laboratory tests it has been shown that ClassicBrush mats remove approximately 34% more soil than standard carpeted mats. Used as primary barrier mats these will do an excellent job of stopping dirt from entering any premises.Good For: Heavy soil applications Environments with a lot of mud, sand & grit Industrial applications Not Ideal For: Water absorption Ideal Placement: Covered exteriors Indoor entryways Industrial areas Interior applications with heavy traffic Key benefits:1- Extra coarse mono-filament nylon fibres combined with traditional solution dyed fibres create excellent scraping and wiping action for maximum soil stopping power.2- High twist and heat-set static-dissipative nylon yarn makes Classic Brush safe to use around sensitive electronic equipment. Solution dyed yarn insures the mat is impervious to bleach, sunlight and repeated washings.3- With gripper backing to prevent creep.4- 100% nitrile rubber backing resists curling and cracking in all types of weather. Classic Brush mats are produced with rubber that is 25% heavier than standard mats to reduce movement.5- Lutradur substrate will not fray, reduces linting, is very heat resistant and creates a strong bond between rubber and carpet.6- Launderable mats will stand up to repeated commercial washing and drying.7- Certified Slip Resistant by the National Floor Safety Institute.Specifications: Face: Cut pile carpet.Yarn: 100% Solution dyed with a blend of scraping and wiping yarns.Backing: 100% Heavy duty nitrile rubberSize variation: +/- 2%Not recommended for use in areas exposed to grease or petroleum products. When purchasing a mat ensure that you have sufficient clearance underneath any door that needs to pass over the top. Flammability: Passes standard DOCFFI-70Please allow approx 10-15 days for delivery More...
Ref: RL1006TriGrip Heavy Duty mats have a 2.5mm thick nitrile rubber base (1.5mm centre) to make them extremely hard wearing. The mats can be placed in high traffic walkways, in front of reception areas, at the bottom of stairs and all other areas that attract heavy footfall. With a range of seven colours to choose from the mats will look good in any establishment whilst still stopping dirt and moisture from being tracked further into the building.Key Features:1- Heavy, 100% dissipative nylon face offers outstanding absorption and durability2- Tight, heat-set, Ultra-Twist yarn construction resists packing and crushing. Dirt filters into the mat face rather than remaining on the top3- Heavy duty 2.5mm (1.5mm centre) moulded rubber backing resists curling and cracking in all types of weather4- Gripper backing (for carpets) to help prevent the mat moving. Also available with a Flat backing (for hard floors)5- TriGrip mats feature the static dissipative Perma Dye and Stain Stopper dye system that ensures the best colour fastness among all yarn dyed mats on the market today6- Certified Slip Resistant by the National Floor Safety InstituteSpecifications: Yarn: 6.6 Solution dyed nylonPile weight: 700g /sq.mTotal weight: 2700g /sq.mBacking: Nitrile rubber 2.5mm border, 1.5mm centreTotal mat height: 8mmSize variation: +/-2%When purchasing a mat ensure that you have sufficient clearance underneath any door that needs to pass over the top.Please allow approx. 10-15 days for delivery More...
Ref: RL1007TriGrip Heavy Duty mats have a 2.5mm thick nitrile rubber base to make them extremely hard wearing. The mats can be placed in high traffic walkways, in front of reception areas, at the bottom of stairs and all other areas that attract heavy footfall. With a range of seven colours to choose from the mats will look good in any establishment whilst still stopping dirt and moisture from being tracked further into the building. These mats have a Flat Backing for use on hard floors.Key Features:1- Heavy, 100% dissipative nylon face offers outstanding absorption and durability2- Tight, heat-set, Ultra-Twist yarn construction resists packing and crushing. Dirt filters into the mat face rather than remaining on the top3- Heavy duty 2.5mm (1.5mm centre) moulded rubber backing resists curling and cracking in all types of weather4- Available with a Flat backing (for hard floors) or Gripper backing (for carpets) to help prevent the mat moving5- TriGrip mats feature the static dissipative Perma Dye and Stain Stopper dye system that ensures the best colour fastness among all yarn dyed mats on the market today6- Certified Slip Resistant by the National Floor Safety InstituteSpecifications: Yarn: 6.6 Solution dyed nylonPile weight: 700g /sq.mTotal weight: 2700g /sq.mBacking: Nitrile rubber 2.5mm border, 1.5mm centreSize variation: +/-2%Total mat height: 8mmWhen purchasing a mat ensure that you have sufficient clearance underneath any door that needs to pass over the top.Please allow approx 10-15 days for delivery More...
Ref: RL1008Waterhog Eco Elite mats are the most ecologically friendly mats in our range. As with our Waterhog Classic entrance mats, they have a bi-level design to trap dirt and water, but Eco Elite mats have a unique herring bone pattern with a recycled symbol in the corner of the mat and a 25% heavier pile. Waterhog Eco gives you even more scraping, wiping and trapping action for the most punishing conditions.How are they Ecologically Friendly?: A: The mat face is made from 100% post consumer recycled drinks bottles.B: Each square foot of a Waterhog Eco mat eliminates 4 half litre drinks bottles from going into landfill. A 3x5 mat will therefore recycle approximately 60 drinks bottles.C: The rubber backing made from 15% post consumer rubber tyres. The durability of the mat is compromised above this figure.D: The mat is guaranteed to last in high traffic environments for at least 5 years. Therefore fewer mats themselves end up in landfill and fewer replacement mats need to be manufactured.E: Waterhog mats stop dirt and water from entering a building and thus save on associated cleaning costs and chemicals used for cleaningFeatures and Benefits: 1- Ridged construction effectively removes and traps dirt and moisture below shoe level, preventing it from being tracked further into the building. No other mat in the industry does this as effectively as a Waterhog.2- Exclusive rubber-reinforced face nubs prevent pile from crushing to maintain high performance and extend product life. This means you won't have the unsightly 'worn path' appearance through the centre of the mat.3- 100% post consumer recycled PET polyester reclaimed from drinks bottles. 25% heavier than Waterhog Classic.4- Anti-static. This means that Waterhog mats are safe for use in computer rooms and around electronic equipment.5- SBR rubber with 15% post consumer recycled tyres. Gripper backing keeps mats in place.6- Water dam retains up to 6.5 litres of water per square metre, preventing the water from flowing off the mat and minimising damage to your surrounding floors and carpets.7- Certified Slip Resistant by the National Floor Safety InstituteSpecifications: Face: Moulded reinforced textile.Yarn: Solution dyed recycled PET 100%Mat Height: 10 mmFace weight: Heavy 30 oz/sq.ydBacking: SBR Rubber, 15% rubber tyresSize variation: +/- 2%Not recommended for use in areas exposed to grease or petroleum products. When purchasing a mat ensure that you have sufficient clearance underneath any door that needs to pass over the top.Please allow approx 7-10 days for delivery More...
Ref: RL1009Create the right impression with your visitors by putting your logo, image or any message on a logo mat. You can use any number of the 30 colours available. Choose from our standard sizes or request a quote for any size up to 12m x 2m. Your logo, image or message is printed into the logo welcome mats fabric, which makes them extremely durable.Follow these simple steps to order your personalised logo mat:1- Select the size of mat you require2- Select the backing for your mat (gripper backing for carpets/flat back for hard surfaces such as linoleum)3- Select background colour for your logo (if the image you are sending already features a background, please select not applicable.)4- Select orientation of the logo on your mat (logos can be printed both portrait and landscape)5- Click Add to Cart and enter your details to confirm your order (make a note of your order number as you may need to refer back to this later)6- Email your logo to logomats@e4e.co.uk quoting your order number or delivery postcode so we can link it to your orderYoure done! We will email a PDF Proof of the design to you to approve, which you can amend as many times as you like, and once we get your confirmation your mat will be delivered within 10 days! More...
Please note - all prices are subject to VAT at the appropriate rate